Common problems and causes of sheet metal processing stamping parts processing

4 problems of sheet metal processing stamping parts

1. Burr: In the process of punching or trimming edges and corners, there is not completely leftover material. Burrs are generated under the section of the steel plate. When the burr height is 0.2mm or more based on the section of the steel plate, the iron powder generated will damage the mold and cause unevenness. .

 2. Concave and convex: The surface of the material is abnormally convex or concave, which is caused by foreign matter (iron filings, dust) mixed in the uncoiling line.
 3. Roller printing: The cleaning roller or the feeding roller is caused by foreign matter attached to it (occurred at a fixed pitch). Generally, the foreign matter on the roller printing on the sheet can be removed.
4. Sliding mark: It is caused by the sliding of the roller, which occurs when it stops or accelerates suddenly.